Cartridge Oil Filters: x Tips to Prevent Comebacks

An oil change is probably i of the least expensive services your shop offers, only it has the possibility to result in ane of the near expensive comebacks if a mistake is made. Cartridge oil filters brand potential mistakes more than probable considering they crave more cognition and tools to properly modify the oil than a canister filter.

Cartridge Oil Filters

  1. Cleanliness is Key: After the old cartridge filter is removed, make clean the cap and housing. This is about the just way y'all are going to be able to spot cracks and damaged threads.
  2. Curl the O-rings: Do not pull, pry or stretch the new O-rings during installation. Lightly lubricate the O-ring and roll it in over the threads to the correct position on the housing.
  3. Employ the Right Tool to Remove the Housing: Only because a housing has wrench flats doesn't mean you lot can use a conventional wrench, socket or even pliers to remove information technology. Tool suppliers have a wide choice of cartridge oil filter tools that will pay for themselves by preventing such a problem.
  4. Be Gentle When Removing the O-rings: Never use a tool method to cut the O-rings off the housing — doing then may accidentally damage the threads or sealing surface. Fifty-fifty the smallest scratch or gouge tin can cause a leak.
  5. Lay Out the Old and New O-rings: Some new applications may require up to iv new O-rings, and some filter kits accept multiple O-rings in the bundle to fit different applications. When the new filter is unboxed, use the one-time O-rings as a footing of comparison when looking at the new O-rings.
  6. Utilise Oil to the O-rings: Always utilize make clean engine oil to the new O-rings and the O-ring grooves in the housing cap. This helps to create a better seal considering the O-rings will not bunch upwardly or twist when the housing is installed.
  7. Drain the Oil After the Filter Has Been Removed: Most cartridge oil filters that are on top of the engine appoint an anti-drain back valve. When the filter is removed, the oil in the housing drains into the pan. This oil is typically the dirtiest in the engine. It needs to be tuckered from the engine. Also, the backlog oil can cause the engine to be overfilled when new oil is poured into the engine. So leave the drain plug out until the oil filter is removed.
  8. Look Up the Specifications and Service Information: Don't guess the torque specs; look them up.
  9. Replace the Housing if You are in Doubt: If you see any impairment that could possibly cause a leak or failure, recommend a new housing.
  10. Audit the Filter: The onetime cartridge oil filter tin tell you lot a lot virtually the engine. Inspect the pleats for damage similar tears and deformation. This could be a sign that the cartridge oil filter was not installed properly during the terminal service. It can also indicate that the filter was clogged and restricted oil flow. As well, expect at the end caps of the cartridge oil filter for separation of the sealing surface.